Nissan blank tcm

John from Denver Mobile Technician Posted   Latest  
Question
Programming
2008 Nissan Pathfinder LE 4.0L (VQ40DE) 5-spd (RE5R05A)

Need Help how to put files where they need to go. Been on phone with Nissan not getting anywhere. Will need to talk on phone I’m sure Thank J-R …

0

Julio from Laurel

 

Owner/Technician
 

Are you using J2534 or consult?

0

Teddy from Ann Arbor

 

Technical Support Specialist
 

The read me file that comes with the programming files says where the files need to go. This is copied from that file. The file location for Windows 10 is the same as listed for Windows 7.

Before using this application, you will need to: 4.1) put the "programming" data file (*.dat) and BLNK_9_IK_All​.​csv file you received with the download, in the correct folder explained below: · For Windows 7 64 bit OS_C:\Program Files (x86)\Nissan J2534 ECU Reprogramming Software\Application data\Reprogramming Data folder · For Windows XP and Win 7 32 bit OS_C:\Program Files\Nissan J2534 ECU Reprogramming Software\Application data\Reprogramming Data folder 4.2) put the configuration data, AT_*****.csv and AT_*****.enc files in the correct folder explained below: · For Windows 7 64 bit OS_C:\Program Files (x86)\Nissan J2534 ECU Reprogramming Software\Nissan\DTool\PDX Package\ExternalFiles\Config\107 · For Windows XP and Win 7 32 bit OS_C:\Program Files\Nissan J2534 ECU Reprogramming Software\Nissan\DTool\PDX Package\ExternalFiles\Config\107

0

Steven from Commack

 

Technical Support Specialist
 

Hi John,

I logged into your laptop and guided you through the process. Hope the programming event went through successfully. 

+1

John from Denver

   

Mobile Technician
   

Yes you did​. ​It went so well I’m thinking about becoming a mechanic. Thank you for all your time and help.

0

John from Denver

 

Mobile Technician
 

Thanks Teddy

That’s a very good explanation of the procedure,very helpful.

0

John from Denver

 

Mobile Technician
 

Got it thank everyone

-1

John from Denver

 

Mobile Technician
 

Thank Steve

0