Programming Question Chrysler
Hello! Have a Chrysler 300 here, no communication with hands free module. After checking power and grounds etc. we are planning to change the module. My question is can we program it with witech ? I am familiar with Witech programming but we found a service bulletin that says you have to connect directly to the module with laptop using special USB cable to program it? If anyone has had experience I'd be happy to hear from you! Thanks in advance for the help! Here is a link for the tsb: static.nhtsa.gov/odi/tsbs/2017….pdf the VIN is 2C3CCAET0DH675706.
Hey Davon, Can you please post VIN I can contact my good friend at my local dealership and I find out for you. Thanks
Hey Davon. This module does not need programming.
There is a TSB to flash the HFM for U0197-00 - Lost Communication With Hands Free Phone Module. Usually unplugging the module and plugging it in reboots it or whatever, but they start to work after that. Other than that, the new one should be plug and play
Thanks guys! I appreciate your time. We will try to reboot and update and replace if that doesnt work. Thanks again!
I have the special cables but waste of time . Good luck finding a dealer that has not lost them .
Consegui restaurar meu módulo HFM, só preciso fazer um cabo com um cabo USB padrão, aqui está como faço meu cabo em casa. Fiz o teste em dois modelos Uconnect e o processo de recuperação funcionou. Depois da atualização começou a mostrar mensagem SMS e mostra o nome da musica e canal do youtube e outros play de musicas. a conexão ficou muito mais repida e estavel.