Saab ECM repair or cloning
Repaired wire harness checked ecm has no injector driver found a used ecm but need ethier old ecm repair or clone used one. Any one know the best company to do this? Or cloning software to use?
Do you have a tech2 with a saab card? tis.saabparts.com/products
Michael, Here is the solution for cloning the SAAB computers. It is freeware and uses an inexpensive cable. I have found the Autel JVCI will work as well. TxSuite | Tools to tune Trionic based Saab and Opel Engines
Michael, I tried that site but it would not down load tried 2 lap tops and 2 browsers
Michael, - Use right mouse click on link and “save link as” - Choose downloads as the folder. - Chrome will protest the download. Click on the up arrow on the right side of the tab that says it cannot download securely. Choose Keep. - Download should then go fine. You may want to install on a laptop you are not concerned about security. I don't recall needing to turn off windows security…
roger at clearcom technologies in Kanosh Utah is top notch for security/key/twice/cim work. For ecm cloning I have had good luck on eBay with saabtunerscott. Search that username and you’ll find his services. Very quick turnaround.
Trionictuning txsuite. Im pretty sure that is a T8 car. Genius stuff works with j2534. I use drewtech Cardaq
Here are the links to a you tube demo of the cloning tools that Michael mentioned. youtube.com/watch?v=ePC7o1… youtube.com/watch?v=RwyFFO…
I just had a Saab 9-3 2.0t with a bad cooling fan driver. I called Xemodix in Canada. They fixed the module. they also have the capability to swap the chip from the faulty computer to the used one. either way I was very happy with the turn around time, ease of the repair and price. Highly recommend!