CEL How To Get Codes Or Live Data

Vern Diagnostician Nebraska Posted   Latest  
Resolved
Driveability
Network Communications
1995 Land Rover Range Rover County LWB 4.2L (3) 4-spd (4HP-24) — SALHC134XSA655836
Check Engine Light

Hope everyone is enjoying the new year! My question is how do I get codes or live data from this Land Rover? Both sites I use have very little information on DTC or DLC locations. Is there a way to connect a scanner to it for data? Is it a blink code type of system? If I can get codes out of it what are the definitions? Any information is better than what I have now. 

Thanks.

0
Kevin Technician
Alberta
Kevin Default
   

It is a blink code type of display. The blinker is mounted on the fuel module beside the pcm underneath the passenger seat. Get access to it and put the engine key on. Then turn it back to off until relay click off. Then turn back to on and check for code either 1 or 2 digit. You may have more than 1 code so fix as you go. I assume you have a us model so blinker display should be available, If…

0
Default Ð Awarded
Nicholas Diagnostician
New York
Nicholas Default
   

Here is some information that should help you. Good luck

+2
Default Ð Awarded
Helpful
Vern Owner/Technician
Nebraska
Vern Default
 

Lots of great Info here, thanks.

0
Default Ð Awarded
Tommy Owner/Technician
North Carolina
Tommy Default
 

Vern, Google roverguage or Libcom14cux. It is a laptop based software you can make an interface with unused connectors in the truck. It's free, & it works ok. Nothing like OBDII , but ok. Also Atlantic British has a Lynx setup on clearance. I have no experience with that one. Give them a call …

0
Default Ð Awarded
Vern Owner/Technician
Nebraska
Vern Resolution
 

Thanks to all that responded. This Range Rover has a display that shows the actual code number. It is located behind the side cover of the right front seat.

0
Resolution Ð Awarded