Dynamic Stability Control (DSC)
Any one have any input on these codes, not much on Prodemand didn't fine any TSB or flow charts also i try clearing the codes and they will not clear the ABS light and traction control light remain on i did notice lots of chatter on the internet about module going out but its all hearsay need more facts and date flow charts pinpoint test. In the meantime i will be checking my fuses and grounds also note i have no issue reading date from the DSC module.
I don't have much experience with this system but it looks like there is a DSC sensor in the system to can go bad. It looks like it is a separate module from the ABS/ DSC module. It reads the YAW and Longitudinal forces. Here is some information on the system that may help. It is for an older model but the description of the sensor should get you going in the right direction…
Any fault descriptions on the scanner?
Hello Jeff Here are the codes that will not clear from the DSC module ....... D36A Message Error Dynamic Stability Control (DSC) Sensor D36B Message Error Dynamic Stability Control (DSC) Sensor D36C Message Error Dynamic Stability Control (DSC) Sensor 5DFC Interface Dynamic Stability Control (DSC) Sensor /VDA Signal Fault 5DBB wakeup line Error 5DF2 Dynamic Stability Control (DSC)
Hello Michael Thanks for the links i will check them out ....
Hi Edward we have had a lot of cars in our workshop with the Dsc code of 5DF2 and our experience has led to the only option on this code in particular is to have the module repaired by a capable repairer or to replace it. Bear in mind if you replace it the module will need coding of the steering angle sensor and lateral acceleration sensor. i cannot guarantee it will cure the other codes but I
Hello Terry Great information, I would ask can i use Mini tech info Subscription to recode or can i use my scan tool or whats best. THanks Again
Hello Edward we use Autologic or Bmw ISTA I am not familiar with Mini tec sorry
Hi Ed did you solve your Mini dsc problem yet ?