Network Integrity Test at Diagnostic

David Technical Support Specialist Commack, New York Posted   Edited  

Can Network Test at the Diagnostic Connector

Jaguar Diagnostic Connector Can Network integrity test

High Speed CAN

The with the battery connected and key on or flashers on 

With the battery disconnected, ohm out pins 6 and 14 you should have approx. 60 ohms

At Pin 6 you should have approx. 2.7v and on pin 14 you should have approx. 2.3v they should both add up to 5v 

Medium Speed CAN 

With battery disconnected ohm out wires 3 and 11 you should have approx. 60 ohms

The with the battery connected and key on of flashers on 

At Pin 3 you should have approx. 2.7v and on pin 11 you should have approx. 2.3v they should both add up to 5v 

0