Program New Keys
Hello group,
I need to install a new lock cylinder on this Nissan. It comes with 2 new keys. My G-Scan has key initialization as part of Nissan software. Never programmed Nissan keys before and was hoping for some guidance. Looks like I need a code from? Any advice would be appreciated. Thanks as always to this wonderful group.
Code can be purchased from nissan assuming you have a lsid (locksmith license from nastf)
Ric, You will need to go to the NATS module and see if there is a function for BCM PIN read. I do a lot of Nissans and Infinity but never had to do an NV model. Usually you read the BCM 5 digit PIN and convert it to either a 4 digit or 20 digit PIN depending on year and version of NATS. If the scan tool cannot read BCM PIN it is sometimes because the BCM is in an easy enough location to just…
Is there a way to tell if we have the correct keys before installation?
A key cloning machine can read the transponder ID. Now depending on where you purchased the lock cylinder and keys it may be a slim chance that the keys could be wrong based on the year that it is. Nissan had keys that looked identical but the early ones had a Texas Crypto 4D-60 chip, around … they started using a higher encrypted chip, the Phillips 46. If it is an aftermarket lock…
Lock cylinder and keys are coming straight from Nissan.
This site can’t be reached Check if there is a typo in vinlocks.com%2C - If spelling is correct, try running Windows Network Diagnostics. DNS_PROBE_FINISHED_NXDOMAIN
As bruce has just said, many times the two keys that come with the cylinder will not program to car. I have seen it twice myself
IME this is the same as an ALL KEYS LOST scenario, and the PIN code for AKL needs to be acquired.
siento llegar tarde para dar una respuesta, pero si le sirve para despues en otra situacion igual tenga esto en mente, al conseguir el codigo del bcm, entra en una pagina de google que se llama KEYTECHTOOLS, en esa pagina hay un recuadro donde usted escribe el codigo que le dio el bcm y lo convierten dandole como resuesta dos codigos para programar, uno viejo y otro nuevo, el viejo es para autos…