6R80 Programming Sol Id And Strategy
Trying to program new sol ID and strategy numbers into PCM but unable to. Keeps logging P163E code.
0
Teddy Default
I have run into this a number of times and here is what I do when it happens. Put the solenoid numbers from the old valve body back in the PCM. If the code goes away, then the PCM is Good. If not, check the PCM as it could be faulty. If the PCM is good, confirm that the solenoid numbers are correct. If they are wrong input the correct numbers. If the are correct contact the supplier of the…
+2
Default
Ð Awarded
Agree
Helpful
Chris Default
This seems to happen with some rebuilders more than others.
0
Default
Ð Awarded