Training aids and services for training curriculums. Corporate Partner

Looking for a tool to borrow and pay for

Chester Instructor California Posted   Latest  
Question
Unsolved
Tooling
2012 Audi S4 3.0L (CCBA) 6-spd (0B2)

Looking for an Audi tool VAS6825 and VAS 6825/1. I am in north county San Diego and I am looking to rent or purchase this tool. Are there any ideas out there? I need to clean the secondary air ports on the supercharged V6. Are there any ideas out there and how I can proceed? Any ideas or help would be greatly appreciated.

0
 
Paul Technical Support Specialist
Colorado
Paul
 

audi​.​snapon​.​com/SpecialToolsDe…

+2
Ð Awarded
Helpful
 
Kevin Owner/Technician
Kentucky
Kevin
 

Absolutely agree… fast easy shipping from them usually also..

0
Ð Awarded
 
Nick Owner
California
Nick
 

ecstuning​.​com/b-genuine-volk… ecstuning​.​com/b-genuine-volk…

0
Ð Awarded
 
Jon Owner/Technician
California
Jon
 

Agree with Paul. I also see them on ebay

0
Ð Awarded
   
Erik Diagnostician
Florida
Erik
   

Hey that tool is great but make sure you have the correct power washer as well. If you don’t have the adapters and power wash unit it’s just extra time and parts to remove the exhaust manifolds, drill bits and adapters etc. FYI just don’t use power tools. The carbon should be easy enough to remove with just drill bits and light…

+1
Ð Awarded
Helpful
 
Stephen Technician
Tennessee
Stephen
 

I would use 45% silver solder to fix the bit to the extension rod to be sure it didn’t separate inside the engine. Using a BRAD POINT wood bit may dig the carbon better and it won’t drill the aluminum, without a lot of forceing.

0
Ð Awarded
Training aids and services for training curriculums. Corporate Partner