I need a known good CKP/CAM for a 2010 Mini R57 N18 motor

I had one last month with code for the exhaust cam sensor. The car had previously had both cam sensors replaced. I was asked to check timing etc. Fault turned out to be the air gap on the exhaust cam sensor to large. caused by flex on the cam cover. The car would run with no fault just by pressing the sensor down with my thumb. I tried a second hand cam cover and a new gasket. With correct…

Here you go. diag​.​net/file/fw7pdvmun…

Hi William, thanks for adding this. I took liberty and created a screenshot and added it to your post. I see that you had a reference waveform in there as well. Not sure if you wanted to edit your post by adding any additional intel about your capture.

Thanks Scott. My apologies , I should've added a screen shot. This file also opens differently in Pico 6. I didn't realize I left some cursors up. Those can be removed. The “reference” waveform is the known good. Channel A - CKP Channel B - Intake CMP Channel C - Exhaust CMP