18 Expedition 3.5
Used car guy bought this. Installed oem air bags, sir module, seat belts etc. Went to use IDS and was suprised it wont talk with vehicle. Have to use FDRS which I have my login and password for. I tried to program sir module it failed, kept popping up saying
THE APPLICATION HAS BEEN ABORTED UNABLE TO ACQUIRE MODULE SECURITY CLEARANCE.
I have an LSID that is current, but have never set it up on FDRS. Any tips or suggestions where to read appreciated.
Dustin, Check out this link. FDRS is at the top of the list. motorcraftservice.com/diagnostic/Sup… If you do not find your answer there here is the page for diagnostic tool support options. motorcraftservice.com/diagnostic/Sup…
I did some reading for you. I did not see any specific reference to FDRS and entering the VSP ID. When I originally worked through this with Ford Diagnostics I was under the impression that the process would be very similar between FDRS and IDS. Also just to confirm I had support check and make sure there was no issue with your VSP account. Everything looks fine. I see that you have not done a…
I have not really used my lsid yet. I have kept it current because I knew sometime in the future it would be needed. I try see if I can get it installed on IDS and FDRS.
There is not really something to install. You just reply with it when either one asks for a VSP ID or LSID. The Authy app on your phone will need to be running because that will be your password.
Well I tried logging into my SDRM account and locked myself out. I had the AUTHY APP on for password
It will unlock in 15 minutes. Be sure that Authy is on the NASTF Screen. If the background screen in Red and says Twilio it will not work. Once you select that it will default back there from there on.
I went into PATS and it asked for my LSID info. Entered that and looked at how many keys programmed etc. I noticed in SIR module dtc U2010 has a SSM 47843 DTCs U2100 and U2101 indicate that the module has not been properly configured per Workshop Manual (WSM) DTC charts. Check the repair history for any module replacement and verify PMI has been carried out by starting a session using the…
Dustin not sure if this is your issue however I was told at Ford Class for advanced electronics that if vehicle has a security gateway you need to use this Ford break out box which links you to the of the can networks. rotunda.service-solutions.com/en-US/Pages/It…
IBelieve 2018 expediton and the ecosport require reprogramming with vccm and its only available to dealers or fleets
The VCMM is available but much more expensive then the VCM due because of its integrated scope package. rotunda.service-solutions.com/en-US/Pages/se… FDRS is compatible with the VCMII, VCMM, and also J2534 VCI's motorcraftservice.com/diagnostic/Sup…