Jaguar Sunroof Synchronization Procedure

David Technical Support Specialist Commack, New York Posted  
Resource
Programming
After Replacing Motor Or Glass Assembly

Jaguar Sunroof Synchronization Procedure

New Roof Opening Panel Motor Synchronization Procedure

NOTES: 

The roof opening panel and roof opening panel motor must be installed, and the roof opening panel alignment checked prior to synchronizing the motor.

This procedure is for a new roof opening panel motor.

Operate the roof opening panel to the fully vent position.

Release the roof opening panel control switch, press the roof opening panel control switch again in the same direction within 0.5 seconds and hold until the glass panel stops after a complete opening and closing cycle.

Roof Opening Panel De-Synchronization Procedure

NOTE:

This procedure is to be followed when the roof opening panel motor is detached or removed from the roof opening panel and before it is re-installed.

Connect the roof opening panel motor electrical connector.

Connect the roof opening panel control switch electrical connector.

Operate the roof opening panel control switch to the vent position until the roof opening panel motor stops.

Release the roof opening panel control switch. Operate the roof opening panel control switch again in the same direction until the roof opening panel motor stops.

Release the roof opening panel control switch, operate the roof opening panel control switch within 0.5 seconds in the same direction and hold for 30 seconds.

After 30 seconds the roof opening panel motor will start to turn in one direction.

Operate the roof opening panel control switch in the opposite (open) direction. The de-synchronization procedure is successful if the roof opening panel motor does not turn.

De-Synchronized Roof Opening Panel Synchronization Procedure

NOTES:

The roof opening panel and roof opening panel motor must be installed and the roof opening panel alignment checked prior to synchronizing the motor.

This procedure is for a roof opening panel motor that has been previously installed and has been de-synchronized.

Operate the roof opening panel to the fully vent position.

Release the roof opening panel control switch, press the roof opening panel control switch again in the same direction and hold for 30 seconds until the glass moves slightly.

Release the roof opening control switch, press the roof opening panel control switch again within 0.5 seconds in the same direction until the glass panel stops after a complete opening and closing cycle.

0