Ford ranger 2019 addblue malfunction

Aly Diagnostician Congo City, Congo Posted   Latest   Edited  
Question
Emissions
2019 Ford Ranger XLT 3.2L 6-spd
Addblue System No Start On 756Km

Hi,

I receive ford ranger 2019 wildtrack 3.2 tdci with addblue warning message​.​car mileage is only 386km.

addblue fluid level is full​.​no faults code on pcm.

how I can reset the addblue warning message?

plz advice and help.

thanks

0
Maurice Business Development Manager
Geebung, Australia
Maurice Default
 

Due to the limited durability of AdBlue, AdBlue has a 2 year lifespan from date of production. It is essential that AdBlue is stored between minus 5 degrees and 20 degrees Celsius. AdBlue can decompose if it is stored at 30 degrees or more for extended periods of time – ammonia can form in such instances. You need to use a Refractometer For Adblue, Ethylene, Propylene, Urea too test the…

0 Default Ð Bounty Awarded
George Owner/Technician
Skagway, Alaska
George Default
 

What readings are you looking for on the refractometer? Can I use the same one as the one for batteries and antifreeze.

0 Default Ð Bounty Awarded
Nicholes Technician
Reading, Pennsylvania
Nicholes Default
 

On a refractometer it should read 32.5 percent .

0 Default Ð Bounty Awarded
Maurice Business Development Manager
Geebung, Australia
Maurice Default
 

You need one that is scaled to read the quality of the urea so while technically a antifreeze refractometer would work but you do not have a true scale to use. discountinstruments​.​com​.​au/refractometer…

0 Default Ð Bounty Awarded
George Owner/Technician
Skagway, Alaska
George Default
 

Thanks for the info. I figured as much when I read what scale you said yo used. I'll have to look into that as I have had several sit outside all winter at -18C for several months. Good tip. I will probably just drain them and get fresh to be safe

0 Default Ð Bounty Awarded
Maurice Business Development Manager
Geebung, Australia
Maurice Default
 

Sounds good

0 Default Ð Bounty Awarded
Chris Technical Support Specialist
Commack, New York
Chris Default
 

If there is a warning on the cluster there should be a code somewhere in the vehicle. What are you scanning with?

0 Default Ð Bounty Awarded
Aly Diagnostician
Congo City, Congo
Aly Default
 

Hi, I use autel maxisys

0 Default Ð Bounty Awarded
Glen Owner/Technician
Arthur, Illinois
Glen Default
 

Try all module scan

0 Default Ð Bounty Awarded
Nicholes Technician
Reading, Pennsylvania
Nicholes Default
 

I’m not sure of fords since I work on heavy truck but work with a lot of def issues. I see your searching the pcm. Does this vehicle have a after treatment module that might be storing the code?

0 Default Ð Bounty Awarded
Michael Mobile Technician
Clinton, Utah
Michael Default
 

That is not many KM. It may be that there is a TSB for this and a software update. Do you have dealer warrantee in the Congo? Should be covered.

0 Default Ð Bounty Awarded
Aly Diagnostician
Congo City, Congo
Aly Delay
 

Hi, thank you for your replies,customer take car and he will wait me till I prepare the ford ids software to diagnostic the car correctly

0 Delay Ð Bounty Awarded
Aly Diagnostician
Congo City, Congo
Aly Update
 

Hi, customer bring car again. I use autel maxisys ,i do quick test ,no faults code stored. then i choose -reductant control module-live data,i observe the tank level sensors voltage .you can see the video on attachment then advise me plz. thanks.

0 Update Ð Bounty Awarded
Glen Owner/Technician
Arthur, Illinois
Glen Default
   

Can you post that data in graph format, adjust the min/max to match data.

0 Default Ð Bounty Awarded