Help Nissan airbag module programming

John Owner Petal, Mississippi Posted   Latest   Edited  
Question
Programming
2018 Nissan Rogue S 2.5L (QR25DE) (RE0F10D)

Body shop installed air bag module don’t have old one to get calibration out of have a consult 3 plus but it dose t have the airbag calibration file any other way to do this 

0
Gary Owner/Technician
Hydes, Maryland
Gary Default
 

doesn't say what type of vehicle so I looked up a 14 Altima. It looks like it comes pre programmed, you just need to make sure the discriminator numbers (part numbers) of each unit matches. Here is what I found in service info After replacing the air bag diagnosis sensor unit, confirm using CONSULT that the ECU discriminated number (identification number) or part number of the new replacement…

0 Default Ð Bounty Awarded
John Owner
Petal, Mississippi
John Default
 

2018 Nissan Rogue

0 Default Ð Bounty Awarded
Gary Owner/Technician
Hydes, Maryland
Gary Default
 

found this For FAST linked parts, even if a system number cannot be acquired from the air bag sensor unit before replacement, the applicable ECU setting operation can still be performed by acquiring the system number from Global Web-FAST (NISSAN parts catalogue).

0 Default Ð Bounty Awarded
John Owner
Petal, Mississippi
John Default
 

Can u tell me how I would go about doing it that way

0 Default Ð Bounty Awarded
Gary Owner/Technician
Hydes, Maryland
Gary Default
 

It sounds like you need to call the parts department from the Nissan dealer you bought the module from and they can look it up for you. the FAST system is the Nissan Parts Catalog

+1 Default Ð Bounty Awarded
Oscar Diagnostician
Lorton , Virginia
Oscar Default
   

Hello John, you have to request the file from Nissan. … -send the part number of the module -VIN of vehicle

+4 Default Ð Bounty Awarded
Helpful