Known Good Cam Crank for Audi S4 4.2L BHF

Jordan Technician Nevada Posted   Latest   Bounty  
2004 Audi S4 4.2L (BHF) 6-spd (01E) — WAUPL68E74A143579
P0305 — Cylinder 5 Misfire Detected
P0306 — Cylinder 6 Misfire Detected
P0307 — Cylinder 7 Misfire Detected
P0308 — Cylinder 8 Misfire Detected
MIL Flashing

Wondering if anyone has a known good cam crank waveform for this Audi S4 Quattro 4.2L V8. The engine code is BHF. It has a cam crank correlation fault for Bank 2 and misfires on all cylinders for Bank 2 at idle. The engine smooths out at higher RPMs. I am fairly confident the chain is off but I would like to confirm with a waveform if I could. I am looking for a Pico file so I can compare them. Thank you in advance!

Chris Diagnostician
New York
Chris Resolution

Here ya go...

Resolution Ð1 Awarded
Caleb Diagnostician

I dont have a known good. However if you have a WPS 500 you could go in cylinder on each bank and confirm that way by comparing compression and valve timing bank to bank. I do this often. Very effective. You can also do an RC test with amp clamp and a sync. Then with the firing order you can see a difference of compression between banks. Maybe you already know all this lol.

Ð1 Awarded
Caleb Diagnostician

Oops Chris kinda made my post null and void lol

Ð1 Awarded
Jordan Technician
Jordan Update

Thank you Chris! You are awesome, bounty headed your way. My chain is indeed off. Looks like both cams are off, not sure why it is only coding for bank 2.

Update Ð1 Awarded