Land Rover RR Sport II L494 desibalization energy saving mode
Ciao Group,
You have by chance discovered a way to temporarily disable the automatic shutdown of the instrument panel?
Thank you all
Luca
Luca, If you are using a battery tender, and it is shutting down, try turning the emergency flashers, or the headlights on.
We have been frustrated with this in the past. We just helped an i Scan owner yesterday do a keyless vehicle module. I think it is best for the programming power supplied to have 100A available and positive clamp to post and negative to chassis ground. SDD battery icon showing green. SDD could be so much better........... Externally powering the VCI as KVM controls the ignition. All keys…
Luca- On other European makes, I simply enable the flashers. Try that.
You could always jumper a relay to power up the car. Like a run/start relay on a Ford. My co-workers have jumpered IGN relays on Toyota during an all keys lost programming event because the scan tool would not turn on the ignition. Just an idea.
Ciao Group, thanks you all, today I tried again turning the emergency flashers and the headlights on in a same vehicle but the instrument panel turns off after 15 minutes.
Luca, This is normal. What are you trying to do?