EGR Monitor Incomplete

Ralph Owner/Technician Colorado Posted   Latest   Edited  
Unsolved
Driveability
Emissions
2013 Ford Transit Connect XL 2.0L (N) 4-spd (4F27E)
Egr Monitor

EGR monitor will not set. Have tried drive cycle numerous times to no avail. Any tips for getting this to set? EGR works just fine.

0
Richard Owner/Technician
New York
Richard
 

There is a tech tip to update the pcm

0
Ð Awarded
Ralph Owner/Technician
Colorado
Ralph
 

Can you direct me or share the link to this TSB ,pro demand and alldata do not show it.

0
Ð Awarded
Richard Owner/Technician
New York
Richard
 

You have to have identifix to access this link, I think dh​.​identifix​.​com/AssetDetailsVi…

0
Ð Awarded
Rick Educator
California
Rick
   

This vehicle requires the EGR to be tested in three regions and the steps I created for some of these I have helped Techs complete, see that attached document. Make sure the vehicle is not overloaded with extra stuff. In-Use Performance Tracking information obtained from CARB shows that these vehicles run with a 63% frequency. Here are steps I have helped Techs use to Complete: - In the…

+1
Ð Awarded
Helpful
Thanks
Randy Diagnostician
Colorado
Randy
 

Are you trying to pass an emission inspection? If so, give us a call. Some EGR systems will not run under certain ambient temperatures and it looks like this one is a minimum 32 F inferred ambient which we haven't seen a heat wave like that in awhile. We have some options for you if that's the case but I would need a lot more information than you posted.

0
Ð Awarded
Ralph Owner/Technician
Colorado
Ralph
 

Good morning Randy,Yes this is a vehicle we are trying to get passed ,It is one of our fleet customers vehicles, “world pac” Do you have a phone number and extension to reach you or your dept at?

0
Ð Awarded
Randy Diagnostician
Colorado
Randy
 

I forwarded your contact to someone closer than me. You should get a call today. In the future, if you can post more information sometimes I can post the answer here which I don't mind since it will help others with the same problem. VIN and OBD data is a must along with why the readiness is incomplete such as battery disconnect, after repair or simply clearing DTCs. Let me know how this…

0
Ð Awarded
Ralph Owner/Technician
Colorado
Ralph
 

Thank you and i appreciate it, Yes it was just a battery replacement that caused the monitor to need to be reset,EGR functions as designed.

0
Ð Awarded
Joe Owner/Technician
California
Joe
 

Hi Ralph, did you ever to the monitor to set?

0
Ð Awarded