Mercedes 360° Camera Not Working
i receive mercedes ml with camera problem.I do not know the history of the car,
i do full scan and i find 3 faults code related
1-MULTIFUNCTION CAMERA 1 FAUILT CODE:A28600 THE CONTROL MODULE CALIBRATION HAS BEEN LOST OR WAS NOT CARRIED OUT.
2-SVS 360° CAMERA 2 FAULT CODE:B1FBD55:CONTROL MODULE FOR 360° CAMERA IS FAULTY.THE COMPONENT IS NOT CONFIGURED.
B1FBD54:CONTROL MODULE FOR 360° CAMERA IS FAULTLY .CALIBRATION IS ABSENT.
PLZ ADVICE AND HELP.
Jaafar, It appears it will need to be calibrated. Someone may have installed a new camera or used. May need to code and program the camera. You would have to look up service information procedures. This would be my starting point.
Hi autel can do this procedure?!i have autel maxisys pro.
Yes autel can do. I have tried to program and calibrate 2017 GL 350 360 camera by autel maxi elite
I know how to but I can’t explain it coz recently I had a 4matic with the same issue
I was able to do that with the Autel Maxisys ADAS, if you go under driver assistance in control modules i believe or 360/avm camera etc, there should be an option for programming. From there it will download and install the software from their servers. Keep in mind you will need to be connected to the internet for this, preferably a wired connection. I always plug in to the LAN rather than use…