Initialize Key
I changed the convenience module, coded the unit, cleared codes and the key remote not locking/unlocking vehicle. Car starts. I tried a non software method and had no success. Any suggestion?
0
Ron Default
what scan tool are you using?
0
Default
Ð Bounty Awarded
Ron Default
watch this video and follow the directions. most scan tools should work the same.
+1
Default
Ð Bounty Awarded
Jeff Default
Service 1. Perform the synchronization between each remote control key and the vehicle according to the following instructions. A4: a. Open the vehicle mechanically with the key. b. Press the unlock button of the remote control key. c. Insert the key into the ignition lock and switch on the ignition. d. Switch the ignition off again and remove the key. e. Press the unlock button or the
+1
Default
Ð Bounty Awarded
Hans Default
Yup, often that works for me
0
Default
Ð Bounty Awarded