How do I get a ECM programming file that I "ordered" through Autolink?

Trace Owner/Technician San Diego, California Posted   Latest   Edited  
Opus IVS
2013 Jaguar XF 2.0L (S) 8-spd (8HP70)
Rough Idle

Using my Autologic unit I sent an order for the programming files for the Engine Control Module on a 2013 Jaguar XF 2.0L.

What do I do to get the files? I need to get it programmed so the car can be picked up tomorrow.

Thanks for your help,

James Technician
Port Hadlock, Washington
James Default

Depends what Autologic unit you are using? I would recommend send them log file on car you are working on and have them help you out.

0 Default Ð Bounty Awarded
Trace Owner/Technician
San Diego, California
Trace Default

Thanks to everyone that responded to my question. Autologic had the file I needed ready for me to download this morning. Trace

+1 Default Ð Bounty Awarded
Jeffrey Technical Support Specialist
Commack, New York
Jeffrey Default

I see you're using a blue box so you will need to place the order through autolink as you said. If you have trouble call the office @ … open at 9EDT so you should have no problem getting it done first thing and they will walk you through it. It's very easy once you know how to use autolink. I hope that helps.

+1 Default Ð Bounty Awarded
Dean Owner
Albany, New York
Dean Default

Download JLR SDD. Use a j box. You get OEM diagnostics and programming. They also have reasonable short term subscriptions. OEM is the way to go, you won't be sorry.

0 Default Ð Bounty Awarded
Michael Mobile Technician
Clinton, Utah
Michael Default

I personally like the Autologic programming better than factory.

+1 Default Ð Bounty Awarded
David Owner/Technician
Bradenton, Florida
David Default

It looks like you have some good responses already and one from autologic which is awesome they are responding.. I have not had anything but good results with autologic.. I have blue box which at one time allowed for programming staight through that device. But times change and that is not allowed anymore. you need a passthru ( JBOX) device.. With a loptop. To input the coding. RAP BOX or the

+1 Default Ð Bounty Awarded
Chris Diagnostician
Commack, New York
Chris Default

Jeffery is right, call us this morning to submit a help request. That software needs to be released manually. Give us a call … We will walk you through the process.

+3 Default Ð Bounty Awarded
Jon Owner
Niwot, Colorado
Jon Default

Trace, assuming everything was submitted properly and they have actually sent you the programming file, also assuming blue box, you should log into your profile on Autologic's website and click the downloads. The file they sent you should be under "my files". Download the correct file and have the blue box connected to the same computer with your ethernet cord, autologic unit turned on in update

0 Default Ð Bounty Awarded