Secondary Ignition

Michael Owner/Technician Quakertown, Pennsylvania Posted   Latest   Edited  

I found some good info on secondary ignition last night from a channel i'm subscribed to. Hopefully this can help newbies like me to help better understand sec ign. Would be good for the more experienced guys too. youtube​.​com/watch?v=lIWSsr…

0
Helpful
Phillip Diagnostician
Anchorage, Alaska
Phillip Default
 

Have a link to share?

0
Default Ð Bounty Awarded
Michael Owner/Technician
Quakertown, Pennsylvania
Michael Default
 

Just put it up. Wasn't uploading on my first try.

0
Default Ð Bounty Awarded
Phillip Diagnostician
Anchorage, Alaska
Phillip Default
 

everything is up. Thanks for the sharing.

+1
Default Ð Bounty Awarded
Geoff Diagnostician
Lahaina, Hawaii
Geoff Default
 

Duane is a great teacher.

+2
Default Ð Bounty Awarded
Chris Diagnostician
Lansdale, Pennsylvania
Chris Default
   

No link up yet. You may find it is better in the future to just post the video. It's the best way to ensure there is no awkward copyright violation situations for you or DN. That way the person who created the content gets their credit and also makes it easier to peruse in the future. Just my $0.02

+1
Default Ð Bounty Awarded
Michael Owner/Technician
Quakertown, Pennsylvania
Michael Default
   

I will post the video. I had all the pics up and I could see them. Not sure whats going on.

+1
Default Ð Bounty Awarded
Chris Diagnostician
Lansdale, Pennsylvania
Chris Default
 

All good now. Thank you Michael.

0
Default Ð Bounty Awarded
Eric Owner/Technician
Edgerton, Wisconsin
Eric Default
 

At 17:15, where he talks about the spark line rising at the end, his statement "Resistance is going down so voltage is going up" is incorrect. The reason for the rise at the end of the spark line is an increase in the resistance across the spark plug gap as the fuel is burned away. That is why a lean mixture will show a spark line with an upward slope along most if not all of the spark line…

0
Default Ð Bounty Awarded
Michael Owner/Technician
Quakertown, Pennsylvania
Michael Default
 

Thanks for picking up on that, Eric.

0
Default Ð Bounty Awarded
Anthony Technical Support Specialist
Kirkwood, Pennsylvania
Anthony Default
 

Hi E: I can't say the same about the rest of it being accurate. I'll let him make it on some of it because of the quality of the captures. But with newer scopes, the errors/omissions would be obvious. Here's what I saw (in no particular order). 1: The way that primary and secondary were described was confusing and misleading. It was made to sound like the only way to measure primary is by…

0
Default Ð Bounty Awarded
Eric Owner/Technician
Edgerton, Wisconsin
Eric Default
 

Guido, I thought is was an old video so I gave him the benefit of the doubt, I looked again and I see it was uploaded in 2018, it doesn't say when it was made though. I agree with what you stated. I just didn't feel like taking the time to point out all the misleading/confusing stuff contained, I just wanted to get the one glaring mistake corrected. There was a lot I didn't agree with, mostly…

0
Default Ð Bounty Awarded
Anthony Technical Support Specialist
Kirkwood, Pennsylvania
Anthony Default
 

Hi E: Maybe next door to you. jalopnik​.​com/does-tire-rota… Guido

0
Default Ð Bounty Awarded