2011 Kia Forte cam /crank
Vehicle came in low on oil. Has some tapping from valve train/timing area that gets worse upon light throttle in Park. Revved up the noise subsideS.
When the vehicle is being slightly revved and I unplug the exhaust cam solenoid it gets quiet . I believe the vehicle to have a timing concern or a bad phaser . Does any one have a cam /crank waveform I could reference ?
thank you!
The attached is for a 2.0L VIN D engine, which is what you should have. However, Hyundai & KIA recycle engine VINs a lot, so this may not be helpful. Let me know if you have the 4-digit engine code and I can verify. diag.net/file/f5u9qw8wx…
Thank you Tim! but I have vin 2. This engine has variable cams on intake and exhaust
Got it. My waveform does not apply, and I don't have one for VIN 2, Sorry. But if you search for a P0335 or P0340 in your information system you should find a good waveform. They are good about that.
Position sensor code information for Hyundai & KIA contains known good waveforms. Just check out the P0335 or P0340 information in Alldata, MotoLogic, OnDemand or the OEM site to find what you need.