2015 Dodge Vf-Promaster 3.0 Pcm Replacement New Or Used

Andrew Diagnostician Belize Posted   Latest  
Unsolved
Programming
No Crank / No Start

Hello Guys, worked on this Promaster 3.0 that needs a PCM. My question is can a used PCM installed and program in this van using WiTech2 or Autel?

0
Tomi Diagnostician
Illinois
Tomi
   

Has to be new. Used is possible via eeprom only.

0
Ð Awarded
Andrew Diagnostician
Belize
Andrew
 

Thanks Tomi, this one is completely dead.

0
Ð Awarded
Arath Diagnostician
Texas
Arath
 

You can’t program a used one they are locked from factory it is possible by unlocking it through HP tuners then program it but a plug and play from eBay should be better

0
Ð Awarded
Andrew Diagnostician
Belize
Andrew
 

Arath, unlocking it through HP tuners is to mail it in? Do you have a link for a plug and play seller on Ebay? I been searching but just used module nothing with plug and play.

0
Ð Awarded
Arath Diagnostician
Texas
Arath
   

…Edit) you have to send it directly to HP tuners they’ll unlock them and put your vin in there too Performance shop have and use that software it shouldn’t cost over 300 to unlock it since they pay $100 for credits but You’re right I normally look up on eBay for plug and play ecms but yours don’t seem to fail often enough to be offered like that I guess unlocking it will be the only option or…

0
Ð Awarded
Andrew Diagnostician
Belize
Andrew
 

I will contact HPTuner and see if they can do it. I have an HPTuner this vehicle isn't list in their list of vehicles

0
Ð Awarded
Andrey Owner/Technician
Washington
Andrey
 

If I remember correctly one of my clients installed used PCM and car start, drive. You have to change vin, code injectors and etc.

0
Ð Awarded
Andrew Diagnostician
Belize
Andrew
 

What tool was used? Can WiTech do that or it was done using other tools?

0
Ð Awarded
Andrey Owner/Technician
Washington
Andrey
 

I confirm and a module was brand new from the dealer. customer said car starts on the module from the box without programming.

0
Ð Awarded
Andrew Diagnostician
Belize
Andrew
 

Thanks everyone for their time and help. We will get a new module. Will give an update when finish.

0
Ð Awarded