Immobilizer initialization

Brian Diagnostician Goshen, Indiana Posted   Latest  
Question
Programming
2009 Honda CR-V EX 2.4L (K24Z1) 5-spd—3CZRE48529G703294
Crank / No Start

This is a wrecked vehicle. Came in from another shop. The D indicator flashes and the green key/security light flashes while you crank it. No security codes. The immobilizer pid in the PCM data says “ban”. Did some research and found that the immobilizer might need to be initialized. It also said you need a pin for the PCM to do the programming. How do you get the pin and do you need any security clearance to get the pin? Thanks for any help!

0
Edgar Owner/Technician
Waukegan, Illinois
Edgar Default
 

Any other codes ???

0 Default Ð Bounty Awarded
Brian Diagnostician
Goshen, Indiana
Brian Default
 

There where codes for the APP. Didn't know if they were related to the issue.

0 Default Ð Bounty Awarded
Maksim Diagnostician
Rancho Cordova, California
Maksim Default
 

Try Autel or Launch X431 these chinese tools can do miracles. i know from past these tools bypass all kinds if pins and go straight to initialization. Try borrow Autel or Launch X431 if dont have. Let me know

+2 Default Ð Bounty Awarded
Mat Diagnostician
Sterling, Virginia
Mat Default
 

Brian was it hit on the front right side ?? was the harness replaced ??

0 Default Ð Bounty Awarded
Brian Diagnostician
Goshen, Indiana
Brian Default
 

It has heavy damage on the drivers side. No damage really on the right side.

0 Default Ð Bounty Awarded
Mat Diagnostician
Sterling, Virginia
Mat Default
 

drivers side is where the fuse box is ,, i think you have a damaged harness . pcm not seeing transmission and to answer your questions if using Honda IHDS you need pin and LSID number from NASTF to get the pin . AUTEL/LAUNCH scanners dont need pin

+3 Default Ð Bounty Awarded
Helpful