Used ecm

John, You may need to clone the original.

Yes, Mike is right. Just clone it.....

Could someone explain the clone procedure.

It depends on what ECU you have. If GM ECU you can most likely clone with IO Terminal or TunerCAT. There is no single solution out there. KTAG can do quite a few but it sometimes misses the immo EEPROM or memory.

The vin shows in GM tis2 web

I did not try ‘tis 2 web it 40$ and if nothing,it still 40$ Thank you Paul.

Use this url to check before you purchase. tis2web​.​service​.​gm​.​com/tis2web

John, What ECU is it. Most modern GM ECUs have a letter and number like E38, E39 and so forth.

John, They changed a few things but access is still there.

Tis2web won’t program this Ecu in my experience need to go through Suzuki or clone. I make clone of a few of them already it’s just faster and easier for me

Walter When I go to the page for files it won’t open.

Good Morning John, Were you able to purchase a subscription?

Walter genuinesuzukimanuals​.​com/#pagebody The new site. Looks like it is there .Waiting to find out if it works for j2534. May need the Suzuki 32 mb card?

genuinesuzukimanuals​.​com/#pagebody

To program the PCM a J2534 device should be enough depending on the brand YMMV but as far as the VTD Learn you will need a Tech2 with Suzuki Card 32 mb/Software via remote programming. It has been my experience that the Tech2 with Suzuki software will be needed for the VTD Learn. Do you have a Tech2?

Yes I have a tech2. Still waiting on if J2534 will work. Never seen the tech 2 do theft without a download.

John’ Email me and I will connect you with the Suzuki support guy. He is very responsive. …

Thank you Donny Matt sent the new link.

John did you ever get that reprogram completed, cause I have one I need to do and have never done a Suzuki , I do have a cardaq M and tech 2, with Suzuki card , just don’t know what hoops to jump through

Have not got back to it. The info I got is your cardaq will work,nothing to install on laptop. It will work off the website through your tool.

I was told it works just like gm​.​Make sure yourdownload covers the ymm. It’s hit and miss of the vehicles you can get files for.

Ok thanks for responding 👍

Yes worked easy as can be​.​changed the vin ect. 30 min theft relearn.

So you purchase subscription from Suzuki or ‘‘tis or both, sorry , I’m doing this for a previous employer and just want to be prepared

Suzuki only. Gm has nothing for the xl7. When you go to program it looks just like your doing a gm. Did you find the Suzuki website?

Yes , that part doesn’t look like gm it says something like to purchase a diagnostic 32 mb card subscriptions fo $35.

That is the one. You don’t need the 32mg card.I know it sound as if you do. My cardaq plus works fine. I have used it on others in the past but the site had changed. That is why it’s so easy​.​You don’t need to down load anything first to make it work like gm, Honda,Chrysler,ect.

Thank you John much appreciation 👍