Chrysler 200S Transmission Failure
i have this chrysler 200 with transmision failure,electronic selector moves to all position but light stuck on N and transmission gear not engages. Customer said that this problem begin when he change the battery.
on transmission ecu there are 2 faults code:
p0610:ecu vehicle options mismatch
p1500:ecu configuration mismatch
plz advice and hlep
You need to take your scan tool and go into the bcm and do a proxy relearn. Chris
Last one I had doing that an update to the tcm brought it back to normal. Like others said start with vehicle configuration restore and if that doesn't work try update tcm or reprogram with same calibration if there is no update available
Just happen to me on a 2015 and end u doing proxy realignment and CVT solenoid relearn and fix the problem. With snapon scanner
Have to do a proxy alignment with Witech
the tcm is out of proxi alignment need to perform bcm proxi alignment with witech2.0 aftermarket. once all the module have been proxi then the transmission will work properly. Anytime the battery is disconnected with these FCA vehicle this issue will happen.
Hi, i do proxi alignment function as you told me by autel maxisys and it say that (the proxi configuration has been aligned successfully) ,but tranmssion still not working. as you will see on the photo attachment ,tcm ecu not found on the current proxi status. plz more advice and help.
Has the TCM recently been replaced with a used one? Can you see if the VIN in the TCM matches the one on the windshield please?? If thats okay it may be the Autel thats the issue. I would use Witech before going any further.
Hi caleb, the transmission was not replaced and vin on the tcm matches the car vin,but model year is 2065 on the tcm ecu information,as u will see on the photo attachment,i do not know if it is autel issue or tcm software!!!!!! for moment i do not have witech ,witech (copy) works on this car correctly?!!!!! plz advice.
Your issue in the photos seems to be with the Electronic Park Brake Module, not the TCM. I am a little confused. In fact I dont even see the TCM listed in the photos. Can you please explain this so we can further assist you??
Yes ,tcm not on the current proxi status list. electronic park brake module is still not configured ,after I do proxi alignment .
I see I doubt the bad data is an issue. More than likely its an Autel anomoly. Witech is the Chrysler factory scan tool. I understand you said you dont have one. Unfortuantly thats how modern cars are. We need more expensive tools and we need to charge the customer accordingly. Anyway I really think you need to do the Proxi Alignment with Witech before wasting any more time or money. If its…
Hi ; I am waiting to finish the witech 2.0 application instalation to do proxy relearn function.