2014 Lacrosse TCM
Quick question, installed used transmission. Is it possible to program used module that came with transmission into this vehicle. Cardaq 3. Have tried & no luck so far.
Should be possible were are you getting stuck
gm-techlink.com/?p=11221 It’s on the Global A vehicle list, and the TCM is listed as a “do not swap.”
Its Global A and Yes it possible but with different equipment Let me know if you want to purchase
Hey Kevin I'm interested in purchasing one, What are the prices and how do I contact you?
I/O Terminal is a very powerful tool, and works for various modules. Kevin. …
Buy new tcm from gm for pennies on the dollar. ECM BCM new almost same price as used why make your life more difficult?
Local dealers modules were 1 week out otherwise would have went new module route for sure. Never have liked using used/salvage yard modules.
Considering most new ECM’s/BCM’s/TCM’s are usually twice to three times as much as used your statement is skewed. Not only are they more expensive with the world wide chip shortage part availability is becoming more and more of a Pending issue. I had a shop request a module (ECM) for a 2017 domestic Manufacture today where the module is on 3+ weeks backorder with no Real ETA on actual…
Gm bcm new for sale from gm for as little as 120. Yards in my area want 100 bucks... Ecm not much more. Put up part number of your trouble to get part friend I show you availability. Maybe in Canada is different? Even during HEIGHT of pandemic new parts from GM were taking me 2-3 days to acquire. Where is the payback timeframe for iotool? And I am not seller of tools but user I own this tool but…
even Though it’s global a those are usually plug and play. It will have the wrong vin but no codes in any module and will work fine
Yes. Have done a few Cruze transmission swaps for our lot. Have had no bricked modules-or cars-so far. LKQ prices them cheap.
Supposed to be a Global A vehicle. According to info on here can't use a used module although mine seems to be working. don't really care if there is a vin mismatch as long as no codes, lights & shifts fine.
Thanks to all that answered. Got as far as programming & it would stop, retry a few times & then give a disconnect message. Decided to just try to start it & lo & behold it started & shifted fine. 10 mile test drive no issues------shipped it.